FW-6PXD - Impact screw driver

2 variants

FW-6PXD series are 1/4" Hex. impact drivers designed with double hammer clutch mechanism with metal housing and motor for high durability. Working torque range is recommended from 10 to 18 Nm, provide high productivity in tightening screws. The range also provide PT and NPT inlet for all markets. The FW-6PXD series consists of 2 type of spindles - short bit and long bit.

Benefits

Double hammer clutch for hard and soft joint application
Metal housing for good durability
Compact with high power
Perform even in harsh environment

FW-5SXD - Impact screw driver

4 variants

FW-5SX series are straight type 1/4" Hex. impact drivers designed with double hammer clutch mechanism with metal housing and motor for high durability. Working torque range is recommended from 3 to 8 Nm, provide high productivity in tightening screws. Th FW-5SX series consists of 2 type of anvils - flat button retainer and pin-hole retainer. The range also provide PT and NPT inlet for all markets.

Benefits

Double hammer clutch for hard and soft joint application
Metal housing for good durability
Compact with high power
Perform even in harsh environment
Compact and light weight

FW-44 - Impact screw driver

2 variants

FW-44 series have 9-blades dual chamber motor and double hammer clutch type impact mechanism. They are designed to give high torque at low speed, which provide the best characteristics for fast reliable and accurate tightening. The models are oil-bath type for long service life. The range consists of pistol and straight type. The range also provide PT and NPT inlet for market fit.

Benefits

Compact and lightweight design provides operator comfort
Oil-bath clutch for extented durability
Stable torque and low vibration with double hammer clutch
Ergonomic forward reverse selection
Low noise

FW-6SXD - Impact screw driver

2 variants

FW-6SXD series are 1/4" Hex. impact drivers designed with double hammer clutch mechanism with metal housing and motor for high durability. Working torque range is recommended from 5 to 10 Nm, provide high productivity in tightening screws. The range also provide PT and NPT inlet for all markets. The FW-6SXD series consists of 2 type of spindles - short bit and long bit.

Benefits

Double hammer clutch for hard and soft joint application
Metal housing for good durability
Compact with high power
Perform even in harsh environment
Regulator provided for easy air control

FW-6PLD - Impact screw driver

1 variant

FW-6PLD series are 1/4" Hex. impact drivers designed with double hammer clutch mechanism with metal housing and motor for high durability. Working torque range is recommended from 10 to 18 Nm, provide high productivity in tightening screws. The reverse is designed on tool's back for easy operation. The range also provide PT and NPT inlet for all markets.

Benefits

Very compact and light weight
Double hammer clutch for hard and soft joint application
Metal housing for good durability
Easy to operate with reverse on tool's back

FW-6PHD - Impact screw driver

1 variant

FW-6PHD series are 1/4" Hex. impact drivers designed with double hammer clutch mechanism with metal housing and motor for high durability. Working torque range is recommended from 20 to 40 Nm, provide high productivity in tightening screws. The range also provide PT and NPT inlet for all markets.

Benefits

Double hammer clutch for hard and soft joint application
Metal housing for good durability
Compact with high power