Pneumatic percussive tools
Pneumatic percussive tools
FC-4Z - Chipping hammer
5 variantsFC-4Z series are poweful and durable chipping hammers with round and hexagonal shank. This series provide PT and NPT inlet.
- Durable even in harsh environment
- Ergonomic handle design for operator comfort
- Provide different Holder Springs for different type of job
FCH-20 - Flux chipper
14 variantsFCH-20 series are ideal flux chippers for various removal operation.: light chipping, carving, scaling, paint & rust removing and weld flux removing. Push lever throttle handle and locking lever throttle provide to meet different regulations. This series provide PT and NPT inlet.
- High revolution and high working efficiency can be obtained from piston valve mechanism
- Very low air consumption
- Two kinds of shank tools (FCH-20 range and FCH-20F range) provide for different chisels
- Durable even in harsh environment
FR-18 - Sand rammer
13 variantsFR-18 series are powerful, light, durable and efficient non-rotary sand rammers. The range is defined by 2 type of tools with blows 30 Hz and sroke 18mm x 50mm. These sander rammers are excellent for ramming sand for casting in any ferrous or non-ferrous foundry. Push lever throttle and locking lever throttle are designed for different regulations. This range provide PT and NPT inlet.
- High quality for exceptionnal durability
- High efficeincy due to powerful tool and high blow per minutes rate.
- Safety lever included to avaid operateur injuries
- Compact, lightweight and powerful
FC-01 - Chipping hammer
11 variantsFC-01 series are compact but poweful chipping hammers with round and hexagonal shank. This series provide PT and NPT inlet.
- Durable even in harsh environment
- Ergonomic handle design for operator comfort
- Provide different Holder Springs for different type of job
FRH-6A - Hammer
15 variantsFRH-6A series standard light hammer are recommended for any light hammering, riveting, cutting, punching and sharing applications. Round and hexagonal shank are available.
- Lightweight and compact
- Slowhitting operation by sleeve valve mechanism to avoid damage
- Very good durability in harsh environment
FR-25 - Sand rammer
9 variantsFR-25 series are powerful, light, durable and efficient non-rotary sand rammers. The range is defined by 2 type of tools with blows 13Hz and stroke 25.4mm x 83mm. These sander rammers are excellent for ramming sand for casting in any ferrous or non-ferrous foundry. Push lever throttle and locking lever throttle are designed for different regulations. This range provide PT and NPT inlet.
- High quality for exceptionnal durability
- High efficeincy due to powerful tool and high blow per minutes rate.
- Safety lever included to avaid operateur injuries
- Compact, lightweight and powerful
FR-32 - Sand rammer
6 variantsFR-32 series are powerful, light, durable and efficient non-rotary sand rammers with capacity of blows 12Hz and stroke 32mm x 127mm. These sander rammers are excellent for ramming sand for casting in any ferrous or non-ferrous foundry. Push lever throttle and locking lever throttle are designed for different regulations. This range provide PT and NPT inlet.
- High quality for exceptionnal durability
- High efficeincy due to powerful tool and high blow per minutes rate.
- Safety lever included to avaid operateur injuries
- Compact, lightweight and powerful
FCH-25 - Flux chipper
13 variantsFCH-25 series are ideal flux chippers for various removal operation: light chipping, carving, scaling, paint & rust removing and weld flux removing. Push lever throttle handle and locking lever throttle provide to meet different regulations. This series provide PT and NPT inlet.
- High revolution and high working efficiency can be obtained from piston valve mechanism
- Very low air consumption
- Two kinds of shank tools (FCH-20 range and FCH-20F range) provide for different chisels
- Durable even in harsh environment
FC-1Z - Chipping hammer
4 variantsFC-1Z series are poweful and durable chipping hammers with round and hexagonal shank. This series provide PT and NPT inlet.
- Durable even in harsh environment
- Ergonomic handle design for operator comfort
- Provide different Holder Springs for different type of job
FC-2Z - Chipping hammer
5 variantsFC-2Z series are poweful and durable chipping hammers with round and hexagonal shank. This series provide PT and NPT inlet.
- Durable even in harsh environment
- Ergonomic handle design for operator comfort
- Provide different Holder Springs for different type of job
FR-22 - Sand rammer
9 variantsFR-22 series are powerful, light, durable and efficient non-rotary sand rammers. The range is defined by 2 type of tools with blows 17 Hz and stroke 22mm x 64mm. These sander rammers are excellent for ramming sand for casting in any ferrous or non-ferrous foundry. Push lever throttle and locking lever throttle are designed for different regulations. This range provide PT and NPT inlet.
- High quality for exceptionnal durability
- High efficeincy due to powerful tool and high blow per minutes rate.
- Safety lever included to avaid operateur injuries
- Compact, lightweight and powerful
FNS-2 - Needle scaler
22 variantsFNS-2 series are ideal needle scalers for removing applications in heavy duty applications. 133 Hz blows provide a very powerful scaling and efficient productivity. 3mm and 2mm needle are provided. The range is designed with two kinds of throttle handle - push start lever and locking off lever throttle. The series provide PT and NPT throttle.
- Metal housing design working in harsh environment
- Two kinds of needle provide for different application request
- Unique valve less design and work well on uneven or irrgular surfaces
- Durable and powerful for heavy application
FRH-6 - Hammer
11 variantsFRH-6 series long stroke light hammer are recommended for any light hammering, riveting, cutting, punching and sharing applications. Round and hexagonal shank are available.
- Lightweight and compact
- Slowhitting operation by sleeve valve mechanism to avoid damage
- Very good durability in harsh environment
FRH-3 - Hammer
12 variantsFRH-3 series light hammer are recommended for any light hammering, riveting, cutting, punching and sharing applications. Round and hexagonal shank are available.
- Lightweight and compact
- Slowhitting operation by sleeve valve mechanism to avoid damage
- Very good durability in harsh environment
FC-3Z - Chipping hammer
4 variantsFC-3Z series are poweful and durable chipping hammers with round and hexagonal shank. This series provide PT and NPT inlet.
- Durable even in harsh environment
- Ergonomic handle design for operator comfort
- Provide different Holder Springs for different type of job